Participation in the CCIL Certification Programs requires that each laboratory implement a quality system that involves an internal audit program.
A series of checklists are provided to assist in the auditing of test procedures.
- LS412 Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
- LS600 Dry Preparation of Aggregates / Reducing Field Samples
- LS601 Materials Finer than 75-μm Sieve in Mineral Aggregates by Washing
- LS602 Sieve Analysis of Fine and Coarse Aggregates
- LS603 Los Angeles Abrasion and Impact
- LS604 Relative Density of Coarse Aggregate
- LS605 Relative Density of Fine Aggregate
- LS606 Soundness of Aggregate by Use of Sodium Sulphate or Magnesium Sulphate
- LS607 Percent Crushed Particles in Coarse Aggregate
- LS608 Percent Flat and Elongated Particles in Coarse Aggregate
- LS609 Petrographic Analysis of Coarse Aggregate
- LS610 Organic Impurities in Fine Aggregate for Concrete
- LS613 Insoluble Residue of Carbonate Aggregate
- LS614 Freezing and Thawing of Coarse Aggregate
- LS615 Alkali Carbonate Reactivity
- LS617 Two-Face Percent Crushed Particles
- LS618 Micro-Deval Abrasion of Coarse Aggregate
- LS619 Micro-Deval Abrasion of Fine Aggregate
- LS620 Accelerated Mortar Bar Test
- LS621 Asphalt-Coated Particles in Coarse Aggregate
- LS623 One Point Proctor Test
- LS702 Determination of Particle Size Analysis of Soils
- LS703 704 Plastic Limit and Plasticity of Soils
- LS705 Determination of Specific Gravity of Soils
- LS706 Moisture-Density Relationship of Soils Using 2.5 kg Rammer and 305mm Drop
- LS709 Permeability of Granular Soils
- ASTM C666 Resistance of Concrete to Rapid Freezing and Thawing
- ASTM D4791 Flat and Elongated Particles in Coarse Aggregate
- ASTM D5821 Percentages of Fractured Particles in Coarse Aggregate
- ASTM D2419/AASHTO T176 Sand Equivalent Test
- AASHTO T304 Uncompacted Void Content of Fine Aggregate
